Scanlock M3

Applications

The Scanlock M3 is a practical and adaptable counter surveillance tool which can be used to meet a range of operational requirements:

  • Protection of meeting rooms against the threat posed by hidden surveillance devices
  • Suitable for desk mounted or hand-held use
  • To identify a wide range of transmission signals including GSM, DECT, WIFI, Bluetooth, 3G, UMTS and Video
  • Real time signal analysis allows fast reaction to identified threats
  • Can be used remotely via Ethernet connection to PC
  • Multi-lingual help facility for international use

Key Features

  • Wide frequency range up to 10 GHz
  • Dedicated detection for worldwide mobile phone communication bands
  • Fast scan rate covers the whole spectrum in 0.5 seconds to detect even fast burst transmissions
  • Filtered detector channels increase the system’s performance
  • Displays range from simple on-screen warning to complex spectrum analysis making it suitable for every level of operator
  • PC analysis software allows scan data to be stored and converted into sweep reports
  • Robust, light and ergonomically designed

Technical Specification

Scanlock M3

Basic

Scanlock M3 Basic

Advanced

Scanlock M3Advanced

Harmonic Receiver

Frequency range:



Sensitivity:
Dynamic range:

Scanlock M3 Basic

Frequency range:
  Band 0: 12.8MHz to 2500MHz
Band 1: 2500MHz to 5000MHz


Sensitivity:
  Better than -50Bbm
Dynamic range:
  Better than 50dB

Scanlock M3 Advanced

Frequency range:
  Band 0: 12.8MHz to 2500MHz
Band 1: 2500MHz to 5000MHz
Band 2: 5000MHz to 7500MHz
Band 3: 7500MHz to 10000MHz
Sensitivity  Better than -50Bbm
Dynamic range:  Better than 50dB

Broadband Detector

Frequency range:
Sensitivity:
Dynamic range:

Scanlock M3 Basic

Broadband Detector:  Not Supported

Scanlock M3 Advanced

Frequency range:  10MHz to 10GHz
Sensitivity  Better than -50Bbm
Dynamic range:  Better than 50dB

ISM Band Detector

Frequency range:
Sensitivity:
Dynamic range:

Scanlock M3 Basic

ISM Band Detector:  Not Supported

Scanlock M3 Advanced

Frequency range:
  2.4GHz & 5.8GHz bands
Sensitivity  Better than -50Bbm
Dynamic range:  Better than 50dB

3G, GSM Detector

Frequency range:
Sensitivity:
Dynamic range:

Scanlock M3 Basic

3G, GSM Detector:  Not Supported

Scanlock M3 Advanced

Frequency range:
  Various worldwide bands
Sensitivity  Better than -50Bbm
Dynamic range:  Better than 50dB

Unit MMI

Display:
Screen update:

Scanlock M3 Basic & Advanced

Display:  TFT 640 x 480 VGA LCD
Screen update:  2 x per second in surveillance mode, 5 x per second in locate mode

Battery Life

Battery operation:
External PSU:

Scanlock M3 Basic & Advanced

Battery operation:
  Basic unit minimum of 4 hours on internal battery
External PSU:
  12v DC @ 4A, reverse polarity, overvoltage and over current protected

General

Main unit size:
Main unit weight:
Antenna size:
Antenna weight:
Operating temperature:
Connectivity:

Scanlock M3 Basic & Advanced

Main unit size:  270mm x 170mm x 80mm (W x D x H)
Main unit weight:  2.1kg
Antenna size:  260mm x 165mm x 60mm (W x D x H)
Antenna weight:  0.9kg
Operating temperature:  +5degC to +35degC, benign office environment
Connectivity:  USB for software upgrades, Ethernet interface

Approvals

EU:

Scanlock M3 Basic & Advanced

EU:  EN300 440.1, EN301 489-3

Accessories

Cable Checker

Scanlock M3 Cable Checker

The Optional Cable Checker Module provides an Interface for the Scanlock M3 Advanced to allow it to monitor signals on the following cables:

RJ45 – Ethernet based devices, such as computers, Switches. Mux’s and IP phone systems.
RJ11 based phone system
Mains Sockets via a C14 Socket
An auxiliary BNC connector for either a flying crocodile Clip lead (supplied) or another BNC Device.

Connectivity:
RJ11 for phone line checking
RJ45 for ethernet checking
C14 for AC mains checking
BNC for other cable checking

30GHz Antenna

The Scanlock M3 30GHz antenna is an optional accessory for the Scanlock M3 Advanced system and is used to extend the frequency range of the unit from 10GHz to 30GHz.

Frequency Range:
Band 0: 10GHz to 12.5GHz and 27.5GHz to 30GHz
Band 1: 12.5GHz to 15GHz and 25GHz to 27.5GHz
Band 2: 15GHz to 17.5GHz and 22.5GHz to 25GHz
Band 3: 17.5GHz to 22.5GHz